#!/usr/bin/bash

# version 2023-01-11

# IMPORTANT: affects order produced by 'sort' and 'ceph-diff-sorted'
# relies on this ordering
export LC_ALL=C

# If your ceph.conf is not in /etc/ceph, then set CEPH_CONF="-c /path/to/ceph.conf"

trap "exit 1" TERM
TOP_PID=$$

out_dir="."
timestamp=$(date -u +%Y%m%d%H%M%S)
lspools_err="${out_dir}/lspools-${timestamp}.error"
rados_out="${out_dir}/rados-${timestamp}.intermediate"
rados_odd="${out_dir}/rados-${timestamp}.issues"
rados_err="${out_dir}/rados-${timestamp}.error"
rgwadmin_out="${out_dir}/radosgw-admin-${timestamp}.intermediate"
rgwadmin_err="${out_dir}/radosgw-admin-${timestamp}.error"
delta_out="${out_dir}/orphan-list-${timestamp}.out"

log() {
  echo $(date +%F\ %T) $(hostname -s) "$1"
}

usage() {
  >&2 cat << EOF

Usage: $0 [-h] "<radospools>" [<temp_dir>]

Where:
  -h               This help output
  <radospools>     The RGW data pool name, if omitted, pool name will be
                   prompted for during execution.
                   If specifying multiple pools, please use space separated
                   list and wrap the entire list in quotes.

  <temp_dir>       Optionally, set the directory to use for temp space.
                   This may be required if /tmp is low on space.

NOTES:
  - This tool should be ran on a node with ceph-radosgw package installed.
    Specifically, it needs the 'ceph-diff-tool' command from that package.

  - This tool is currently considered to be EXPERIMENTAL.

  - False positives are possible. False positives would likely
    appear as objects that were never deleted and are fully
    intact. All results should therefore be verified.

WARNING:
  - Indexless buckets will appear as 100% orphan objects.
  - Therefore, this tool MUST NOT be used in environments with indexless
    buckets.

EOF
  exit 1
}

#
# checkReturn RETURNCODE MESSAGE TERMINATE
#  RETURNCODE - ( usually $? ) of previous command
#  MESSAGE    - Message to print on non-zero return code
#  TERMINATE  - non-empty == terminate the script on non-zero return code
#
checkReturn() {
  if [ $1 -ne 0 ]; then
    error_addon=""
    if [ ! -z "$3" ]; then
      error_addon="; Terminating"
    fi
    log "ERROR: ${2} failed: returned ${1}${error_addon}"
    if [ ! -z "$3" ]; then
      >&2 echo
      >&2 echo '***'
      >&2 echo '*** WARNING: The results are incomplete. Do not use! ***'
      >&2 echo '***'
      kill -s TERM $TOP_PID
    fi
  fi
}

prompt_pool() {
    # note: all prompts go to stderr so stdout contains just the result
    >&2 echo "Available pools:"
    rados ${CEPH_CONF} lspools >"$temp_file" 2>"$lspools_err"
    checkReturn $? "Listing pools failed" 1

    >&2 sed 's/^/    /' "$temp_file" # list pools and indent
    >&2 printf "Which pool do you want to search for orphans (for multiple, use space-separated list)? "
    local mypool
    read mypool
    echo $mypool
}

radosgw_radoslist() {
  log "Running 'radosgw-admin bucket radoslist'."
  rm -f "$rgwadmin_flag" &> /dev/null
  radosgw-admin ${CEPH_CONF} bucket radoslist >"$rgwadmin_out" 2>"$rgwadmin_err"
  RETVAL=$?
  if [ "$RETVAL" -ne 0 ] ;then
    touch "$rgwadmin_flag"
  fi
  checkReturn $RETVAL "radosgw-admin radoslist" 1
  log "Completed 'radosgw-admin bucket radoslist'."

  log "Sorting 'radosgw-admin bucket radoslist' output."
  sort -T ${temp_prefix} -u "$rgwadmin_out" > "$rgwadmin_temp"
  checkReturn $? "Sorting 'radosgw-admin bucket radoslist' output" 1
  log "Completed sorting 'radosgw-admin bucket radoslist'."

  log "Moving 'radosgw-admin bucket radoslist' output."
  mv -f "$rgwadmin_temp" "$rgwadmin_out"
  checkReturn $? "Moving 'radosgw-admin bucket radoslist' output" 1
  log "Completed moving 'radosgw-admin bucket radoslist' output."
}

rados_ls() {
  log "Starting 'rados ls' function."
  rm -f "$rados_flag" &> /dev/null
  rm -f "$rados_out" &> /dev/null
  local mypool
  for mypool in $pool; do
    log "Running 'rados ls' on pool ${mypool}."
    rados ${CEPH_CONF} ls --pool="$mypool" --all >>"$rados_out" 2>"$rados_err"
    RETVAL=$?
    if [ "$RETVAL" -ne 0 ] ;then
      touch "$rados_flag"
    fi
    checkReturn $RETVAL "'rados ls' on pool ${mypool}" 1
    log "Completed 'rados ls' on pool ${mypool}."
  done
  if [ ! -e "$rados_flag" ]; then
    # NOTE: Each entry (line of output) of `rados ls --all` should be in
    # one of four formats depending on whether or not an entry has a
    # namespace and/or locator:
    #
    #   <TAB>oid
    #   <TAB>oid<TAB>locator
    #   namespace<TAB>oid
    #   namespace<TAB>oid<TAB>locator
    #
    # Any occurrences of the 2nd, 3rd, or 4th (i.e., existence of
    # namespace and/or locator) should cause the create of the "odd" file
    # and an explanation in the output, and those entries will not be
    # retained, and therefore they will not be called out as orphans. They
    # will need special handling by the end-user as we do not expect
    # namespaces or locators.

    # check for namespaces -- any line that does not begin with a tab
    # indicates a namespace; add those to "odd" file and set flag; note:
    # this also picks up entries with namespace and locator
    log "Checking for namespaces"
    grep --text $'^[^\t]' "$rados_out" >"$rados_odd"
    if [ "${PIPESTATUS[0]}" -eq 0 ] ;then
        log "Namespaces found"
        namespace_found=1
    fi

    # check for locators (w/o namespace); we idenitfy them by skipping
    # past the empty namespace (i.e., one TAB), skipping past the oid,
    # then looking for a TAB; note we use egrep to get the '+' character
    # and the $ in front of the ' allows the \t to be interpreted as a TAB
    log "Checking for locators"
    egrep --text $'^\t[[:graph:]]+\t' "$rados_out" >>"$rados_odd"
    if [ "${PIPESTATUS[0]}" -eq 0 ] ;then
        log "Locator found"
        locator_found=1
    fi

    # extract the entries that are just oids (i.e., no namespace or
    # locator) for further processing; only look at lines that begin with
    # a TAB and do not contain a second TAB, and then grab everything
    # after the initial TAB
    log "Generating final 'rados ls' output (without namespaces or locators)"
    grep --text $'^\t' "$rados_out" | grep --text -v $'^\t.*\t' | sed -E 's/^\t//' >"$temp_file"
    mv -f "$temp_file" "$rados_out"

    log "Sorting 'rados ls' output(s)."
    sort -T ${temp_prefix} -u "$rados_out" >"$temp_file"
    checkReturn $? "Sorting 'rados ls' output(s)" 1
    log "Sorting 'rados ls' output(s) complete."

    log "Moving sorted output(s)."
    mv -f "$temp_file" "$rados_out"
    checkReturn $? "Moving temp file to output file" 1
  fi
}

temp_prefix="/tmp"
if [ ! -z "$2" ]; then
    if [ -d "$2" ]; then
        temp_prefix=$2
    else
        echo
        echo "ERROR: Provided temp directory does not exist: ${2}"
        usage
    fi
    temp_prefix="$2"
fi
temp_file=${temp_prefix}/temp.$$
rados_flag=${temp_prefix}/rados_flag.$$
rgwadmin_flag=${temp_prefix}/rgwadmin_flag.$$
rgwadmin_temp=${temp_prefix}/rgwadmin_temp.$$

if [ $# -eq 0 ] ;then
    pool="$(prompt_pool)"
else
    if [ "$1" == "-h" ]; then
      usage
    fi
    pool="$1"
fi

error=0
rados ${CEPH_CONF} lspools > $temp_file
for mypool in $pool; do
    if [ $(grep -c "^${mypool}$" "${temp_file}") -eq 0 ]; then
        echo
        echo "ERROR: Supplied pool does not exist: ${mypool}"
        error=1
    fi
done
if [ $error -gt 0 ]; then
    echo "Terminating"
    exit 1
fi

log "Pool is \"$pool\"."
log "Note: output files produced will be tagged with the current timestamp -- ${timestamp}."

rados_ls
radosgw_radoslist

#
# Check for any empty output files
#

for myfile in $rados_out $rgwadmin_out; do
  if [ ! -s "${myfile}" ]; then
    log "ERROR: Empty file detected: ${myfile}"
    log "ERROR: RESULTS ARE INCOMPLETE - DO NOT USE"
    exit 1
  fi 
done

log "Computing delta..."
ceph-diff-sorted "$rados_out" "$rgwadmin_out" | grep --text "^<" | sed 's/^< *//' >"$delta_out"
# use PIPESTATUS to get at exit status of first process in above pipe;
# 0 means same, 1 means different, >1 means error
if [ "${PIPESTATUS[0]}" -gt 1 ] ;then
    log "ERROR: ceph-diff-sorted failed with status: ${PIPESTATUS[0]}"
    log "TERMINATING - Results are incomplete - DO NOT USE"
    exit 1
fi

log "Computing results..."
found=$(wc -l < "$delta_out")
possible=$(wc -l < "$rados_out")
percentage=0
if [ $possible -ne 0 ] ;then
    percentage=$(expr 100 \* $found / $possible)
fi

echo "$found potential orphans found out of a possible $possible (${percentage}%)."
echo "The results can be found in '${delta_out}'."
echo "    Intermediate files are '${rados_out}' and '${rgwadmin_out}'."
if [ -n "$namespace_found" -o -n "$locator_found" ] ;then
    echo "    Note: 'rados ls' found entries that might be in a namespace or might"
    echo "          have a locator; see '${rados_odd}' for those entries."
fi
echo "***"
echo "*** WARNING: This is EXPERIMENTAL code and the results should be used"
echo "***          only with CAUTION!"
echo "***"
echo "Done at $(date +%F\ %T)."
